Logo
 
 

Setup an Agent for ShadowProtect

 
 
 
Section Contents
  1. Create an Agent for ShadowProtect - steps to create an agent using the web interface
  2. Install an Agent for ShadowProtect - steps to install the agent on a machine
Create an rCloud Agent for ShadowProtect (Windows Agent)

"rCloud Agent for ShadowProtect" is also referred to in this document and the rCloud web application as "Windows Agent".

A single agent can be used to backup multiple machines.

Create an rCloud Agent for ShadowProtect (Windows Agent) as follows:

  1. Click on the Agents tab.
  2. Use the Clients drop down on the top right of the screen to select the client you are working with.
  3. Click ADD CLOUD DR AGENT.

    rcloud-help-shadowprotect-32.1.jpg

  4. Select the Agent Type: ShadowProtect and enter an Agent Name. Choose a meaningful name, it will be used to identify the agent in rCloud.

    rcloud-help-shadowprotect-33.1.jpg

  5. Click ADD.

  6. Enter the Agent settings

    • In the Bandwidth Throttling section enter the low and high bandwidth period start times and limits in Kbps using 24 hour clock format as shown below.
    • Optionally check the Use high bandwidth during weekends box to allow the agent to use the high bandwidth setting all day Saturday and Sunday.
    • In the ShadowProtect install directory field enter the path to the ShadowProtect installation folder.

    NOTE: This folder must contain image.exe (we require version 3.0.0.18 or later of this file) and mount.exe

    • Enter an Agent workspace path. This must be on a local drive/path. The Agent uses this space during each backup. The Agent will need a minimum of 5% of the total protected volume sizes (e.g. a total 1TB of disk space on the protected machine(s) will require 50GB of workspace).

    rcloud-help-shadowprotect-34.1.jpg

  7. Click SAVE.

Install an rCloud Agent for ShadowProtect

Once you create a ShadowProtect Agent in the rCloud, you will install the Agent software by performing the following steps:

NOTE: Microsoft .Net Framework 3.5. SP1 is required for agent installation. Microsoft .NET Framework 4.0 alone will not currently work, although you can have both installed.

  1. In the rCloud Web application, click on the Agents Tab.
  2. Use the Clients drop down on the top right of the screen to select the client you are working with.
  3. Click the two drop down arrows next to the name of the Agent.
  4. Select Download.

    rcloud-help-shadowprotect-35.1.jpg

  5. Click Run to install the Agent on the local machine or you can click Save to save it for later installation.

  6. Execute the file if you saved it and click Next at the Welcome screen.
  7. On the welcome screen click Next.

    rcloud-help-shadowprotect-36.jpg

  8. Review the EULA and click I Agree.

    rcloud-help-shadowprotect-37.jpg

  9. Accept or modify the installation location and then click Next.

    rcloud-help-shadowprotect-38.jpg

  10. Ensure the Run agent identification check box is checked and click Next.

    rcloud-help-shadowprotect-39.jpg

  11. Enter your Accelerite user credentials (your email address is your user name).

    rcloud-help-shadowprotect-40.gif

  12. Select a Client and available agent from the drop down lists and then click Identify Agent

    Note: In order for the rCloud system to function, the Agent must be identified. If you choose not to identify the Agent, installation will continue but you will have to identify it manually.

    rcloud-help-shadowprotect-41.gif

  13. When prompted, confirm that your selection is correct as the identity of an agent can not be changed, then click OK. After you identify the Agent, you can update the configuration of your agent. Be sure to save any changes you make here before moving on to the next installation step, or you may have to re-enter them.

    rcloud-help-shadowprotect-42.jpg

  14. Click Next.

  15. Ensure the Run rCloud Universal Agent Tray Monitor and Run rCloud Universal Agent Service check boxes are selected and click Next.

    rcloud-help-shadowprotect-43.jpg

  16. The setup process will download the latest version of the agent software. This may take some time depending on your bandwidth. The file is approximately 50MB. Click Hide to let the process complete the download in the background.

    rcloud-help-shadowprotect-44.jpg

  17. Click OK when the update is complete.

    rcloud-help-shadowprotect-45.jpg

  18. Click Finish. You should see the rCloud Agent Tray Monitor running with a green check mark. This confirms that the setup of your agent is complete.

    Note: If the icon does not immediately show a green check mark, it may take some time as it will retry the operation if it did not succeed.

    rcloud-help-shadowprotect-46.gif

  19. Confirm that the Agent is checking in to the rCloud.

    NOTE: If the icon does not immediately show a green check mark please wait a few minutes as this can take some time.

  20. Confirm that the Agent is checking in to the rCloud based on the Last check-in time

 
또 다른 질문이 있으십니까? 문의 등록

댓글

 
Adding comment, please wait....

Provide Feedback on Article:

Subject:
Comments:*
Zendesk 제공