Community
 
 
 

Radia Support

팔로워 711명
 
Avatar
Qasimuddin

Workstation rebuild

When Machine is built it gets the old hostname rather than new. Old hostname has been removed from SQL, HPCA and AD. Upload logs indicate the machine is built but it has been assigned the old hostname.

댓글 11개
0

댓글을 남기려면 로그인하세요.

 
 

Previous 댓글 11개

Avatar
Ana Caldas

Hi Qasimuddin,

Was the machine already managed by Radia before? The old hostname is also stored in C:\ROMBL.CFG and the Portal (ROM object).

댓글 작업 고유 링크
Avatar
Qasimuddin

Hi thanks for your reply. Yes the machine was/is managed by Radisson. It has been removed from ROM and also it's hard drive has been formatted many times.

댓글 작업 고유 링크
Avatar
Qasimuddin

But every time it's is PXE booted, it builds to its old hostname and also creates an entry in ROM.

댓글 작업 고유 링크
Avatar
Ana Caldas

We'll have to take a closer look at your environment. Could you open up a support ticket for this?

댓글 작업 고유 링크
Avatar
Nathan Truitt

Did you also delete the three files (.xml, rnl.log and all.log for that machine from the OS Manager upload folder?

댓글 작업 고유 링크
Avatar
Qasimuddin

Hi I have deleted the logs today and set the machine to build but unfortunately it built again to the old hostname.

댓글 작업 고유 링크
Avatar
Qasimuddin

I have also deleted the DNS record (A record) for the old hostname.

댓글 작업 고유 링크
Avatar
John Edmondson

We found that we had to be sure to delete the ROM child object in the portal specifically, if we just deleted the computer object (through the portal) the ROM object would remain and would be picked up by the computer object again.  Not sure if this will help. If you using OSMKIT to do it, this may not apply.

댓글 작업 고유 링크
Avatar
John Edmondson

As well, there could be an object in the portal with another name (like serial number) that is actually being used by HPCA (and would have a ROM child object), you could check for that.

댓글 작업 고유 링크
Avatar
Qasimuddin

Thanks for your reply John. Yes I have ensured both these were checked prior to posting here.

댓글 작업 고유 링크
Avatar
Qasimuddin

 

I had a look on Tier2 and come across the following “RSP: Data returned from SQL: {Oldhostname 1x.2x.11x.xx 1x_2x_11x_0 xxx.25x.xxx.0 40a8f0a48818}” , machine is getting its hostname from SQL but from where? as I have deleted all the entires from the tables I know off, Roms_Lookup & device config.

 

댓글 작업 고유 링크

Top Contributors