Hi Dom,

just one question
template and iso's can be add to the cloud management console
but how to add those?

--> You need to setup a webserver and host the templates and ISO's on it. And then upload them to CloudPlatform using the URL ( see the admin guide for details on this).

Note: Make sure that the global configuration secstorage.allowed.internal.sites is set to allow the template download from the internal webserver.

Thanks,
Prashanth

thanks for the reply
i 'm trying to import Iso on the webserver but i'm getting connection refuse
( i set secstorage.allowed.internal.sites in global configuration)
i'm using as practice the same webserver of CP manager to import the iso

Regards

dom

i'm using as practice the same webserver of CP manager to import the iso

---> You mean to say to are using the CP management server as webserver? Then can you try to stop the iptables on the management server and see if that resolves the issue ( you may also add an iptable rule to allow access to webserver on the management server).

Note: The template/ISO is downloaded by the SSVM running for the zone. You can login into SSVM and check if you wget the file from the webserver.

hi there
yes i ment using the CP management server as webserver for the iso.
i tried to stop the iptables no joy ,same issue
also i connected to the ssvm and the wget of the iso file failed with the message

Connecting to xxxxxxxxxx:xx... failed: No route to host.

very strange on the practice guide they were saying to use the CP management server as webserver to add iso
but seems is not that easy

regards

Dom

Did you restart the management server after changing the secostorage.allowed.internal.sites?

Do you see any static route to the network defined in secstorage.allowed.internal.sites on the SSVM?

Say you have set secstorage.allowed.internal.sites to 10.0.0.0/8 then you will see a static route to 10.0.0.0/8 network through eth1 of SSVM.

The routes get programmed into SSVM when it is starting, so you may try to stop/start the SSVM from CloudPlatform UI to see if the issue gets resolved.

-Prashanth

hi there i tried to setup a webserver in windows 2008 and the iso seems downloaded but i got in CP :

ready = no

and

Status = HTTP Server returned 404 (expected 200 OK)

but the webserver is working fine i tested

cheers

Dom

hi there
thanks for the reply
i'm trying to use a 2008 webserver that i setup just for prof concept
but seems is not getting the ISO

regards

Dom

plus the web server is working fine becasue if i open a browes and browse in the foldr where the ISOs are i can see them

regards

dom

hi there
i make it work
i had to add the mime for the iso to map th eiso itself on the webserver otherwise Cloud platform managemnt will not see the iso image

Regards

Dom

So according to you....Which method is works for you? I am just eager to hear from you...Check out Google shared contacts