We are running HP Thin Clients in our environment, utilizing the file based write filter. There is a package which we need to install on these thin clients, this requires a reboot post installation to complete.

We currently have the reboot flag on the package set to AI=SA,AD=SA

The ZCREATE does not force a reboot.

We need to ensure the following:

• Software connect is issued, write filter is turned off and device rebooted
• Package installs, and causes the Thin Client to reboot (with write filter off so that the installation can complete)
• Software connect continues when devices is back up
• Once connect has fully completed, write filter is turned back on and device rebooted

We have tried changing the ZCREATE method so that it causes a device reboot, but the agent doesn’t take too kindly to this. The software connect does not complete after the device comes back online, and the write filter remains disabled.

How can we instruct the agent to reboot the device after installing the package, to complete the installation, whilst maintaining the FBWF?

Note: We are running 8.1

Hi,

As an Accelerite partner, i came accross a PPT presentation on the Accelerite Support site, titled "Technical-Overview-Radia2014". I see that this a rather old PPT but it is still available on the support site so i take it to be valid.

Slide 37 in that presentation is titled "Prohibited Software" and it talks about the feature to "Identify and block unapproved or prohibited software" using "prohibition rules". It also mentions that Radia management agent can "Identify prohibited software from Blacklist" and "Stops prohibited software form running each time user attempts to launch".

Since the concept of strict control over software installation is something many customers are interested in, this caught my attention as i have been working with older Radia on several projects and i have never seen such a feature in the product, or at least i don't remember.

So, is this really possible to Radia to handle "prohibited software" and if yes, what RCA module, feature, objects or mechanisms are used to support this? Is this a part of Usage Management?

Please point me in the right direction, how and where in the RCA system to configure the control over "prohibited software"?

Is this and explicit RCA feature or just an implicit cool thing you could indirectly construct out of standard RCA objects and features?

(of course, i wasn't able to find any clue in the official product manuals, no "prohibition rules" or anything like that is mentioned there)

Any guidance would be appreciated, thanks

marko

 

Hi,

Is there an option to use OR switch in ZSTOP parameters?

I would like to check below configuration WORDPOS(EDMGETV(ZCONFIG,ZHDWCTYP),'LAPTOP')=0 OR POS('PLD',UPPER(EDMGETV(ZCONFIG,ZHDWCOMP)))=0

Is there currently or plans to support powershell in future releases for Radia. As many modern technologies have taken this root we have been able to automate many tasks, saving time and reducing human error.

If this is not currently the case I would interested in building my own modules is there any API documentation that can be released? 

 

 

 

We have a model of thin client where the FBWF is not being re-Enabled during the overnight connect. 

After the device is built the filter is on due to a package that enabled and sets the filters exclusions list by the morning the filter set back to off.

Is there any known issue with the 8.1 agent or configuration that could cause this? 

 

When Machine is built it gets the old hostname rather than new. Old hostname has been removed from SQL, HPCA and AD. Upload logs indicate the machine is built but it has been assigned the old hostname.

Hello,

I am trying to download Radia 10, however the download speed is really slow/not stable at all and it usually stops due to network errors. Can someone please provide a download link on external provider or something

Hi Team,

Could you please let me know whether the RCA 9.2 can be integration with HP uCMDB, we want to integrate this for asset information, if this can be possible could you suggest the document or link to refer for more information.

Thanks

Microsoft's changed the way they number their bulletins. The previous model used security bulletin ID numbers; this method is being retired, and the new security bulletins will be identified by vulnerability ID numbers and KB Article ID numbers.

Kindly extend your support to acquire the new security bulletins,

 

Thanks & Regards,

Bhupender

+91 9805004140

Dears ,

I have migrate the CAE core into another domain and since then I can't deploy an agent when I troubleshot I found that it tries to access the old  CORE FQDN

what I missed ???

Hello,

I would like to execute remote command to download patches but I have applied "Extended Notify Security to validate remote notify" https://radiasupport.accelerite.com/hc/en-us/articles/203659824 and when I type Radntfyc.exe localhost -l Token -p PASSWORD -e ENCRYPT Token it use command from the ZNFYCMDL Radntfyc localhost radskman ip=<core-ip>,dname=software,uid=$machine,cop=y,log=connect.log.

There is other way to run command remotely to agent to download patches (not software)?

Should I use some special switches for Radntfyc.exe or add special values for class Extended Security Notify in CSDB?

Does RCA 9.1 CP1 will support windows 10 and windows 2012 versions? In the RCA 9.1 CP1 Release notes I could not find any update about windows 10 support.

We have an issue when we enforce software connect on group of 300 computers. We see that some of computer from group never get software
connect, they just timeout. Software connect for individual computer works fine but when we enforce software connect on 300 computers
only 50-60% actually gets software connect.
Is there a way to define timeout interval for computer and number of retries if computer is offline?

Hi guys,

We have some problems installing ms16-142 from radia. The problem is that clients have a message ' PATCH RISK Bulletin MS16-142 - risks have been detected '
NOTE : When we manually installed ms16-142, there is not a problem.

Well, how can we resolve this problem ? Have you any idea ?

Thanks..

i want to know when we push any job and system is shutdown at that time

when job will be run?

i mean to say after some time the system is in live mode at that time job is run or not?

It's been a few versions of radia sense I've looked at the Messaging server configuration files and I need some clarifications/definitions of how it works.

My goali is to enable a secondary server for forwarding messages to. 

I know in the rms.cfg file, I can add a PRI 20 in the  mgs::register Forward {}  section to have a secondary server for forwarding messagings to, but what I don't understand is other sections of the rms.cfg, like msg::register MDM, I also see forward statements of PRI 10. If I was using MDM, would I needd to add in a PRI 20 for a secondary server also?

 

Also, what defines in the RMS.cfg if the machine is a forwarder or poster (writes to ODBC).

 

I have a few questions about work in Radia Editor: 1. Can I select and then add/Replace/Delete multiple files in package? (How if it can?) 2. I want to see or to get a Folder Structure in Editor not just a lot a files, when I open package. Regards Thanks in advance

Hello all, do someone have any experience and/or tips and tricks for setting MS AD (LDAP) authentication for Satellite (especially in Radia 9.1)? Even though the configurations is really simple I've got two different behavior at two different systems. At one systems I can configure LDAP Auth, it configures Apache and simple doesn't work - I can't get to Sat web UI by domain login neither by admin login. At second system I'm unable to configure LDAP Auth at all, it just tell me that it can't connect LDAP, but from server I can ping and telnet domain controllers.

Getting error :- A program might need information from you or your permission to complete a task Zcreate installation method : "NATIVE C:\DLP_ENDPNT_WIN8\installagent64.bat"

Not able to to sync downstream satellite server from full stream server .from core its working Error code 653

When I run any deployment ( patch, audit) clients are not downloading the data from local repository (sateliete server ).

Error: WUA Scan failed with Not enough storage is available to complete this operation., please ensure c:\Windows\Software Distribution is being excluded from virus scans. Getting error in windows 8 .

I'm issuing the command raddbutil export -output test -data 1 -walk 1 Primary.Client and in both my 7.8 lab and production environment nothing get's exported. as it process the domain, the output of the instances state "Would be exported". However, If I do that same command in 9.2 it get's exported. any ideas?

Has anyone every seen where an application was published and the full service satellites have been synced yet the job will not come down unless the client is pointed to the core? We have a job that gives the "This application failed to install correctly. Please contact your system administrator for assistance." error every time unless it's pointed to the core. The exit code in the connect.log is always 709. I've deleted the zservice and appropriate lib folder but the error persists. Any ideas?

We are facing deployment with OS deployment in our organisation. My Wim file size is 9 GB (Appox.) and we have split it into 255 MB SWM files. While installing windows using ImageX it throws the error " Image install or set up error" Is this something related to size of image or there is some other issue where you can help me with troubleshooting?

Dear team,

 

For building 32 bit or 64 bit packages required separate packaging machine / desktop ? or can anyone provide detail information about to build packages .

  

Thanks & Regards

Randhir Phadtare

When running self service manager, Is there a way to make the install screen, either by an .msi/batch/cmd/setup.exe viewable so the user can choose a few options while the install is running. I have a few driver installs where they are not signed drivers but are allowed to install the driver regardless. I can not get the install to run silent because of this pop up. I would like to deliver it via self service manager but need to have the install screen appear. Is there a way to accomplish this? What setting in the DB editor need to be set in order for the install to be viewable. Any info would be great. Thanks!